Carbon brick

Application fields and characteristics:

The carbon brick suction lifter is widely applicable for the handling of various carbon bricks, marble, etc. Due to the special nature of carbon bricks, which have a rough surface and are subjected to high temperatures, our carbon brick suction cups use sponge foam suction cups and high-temperature resistant vacuum suction cups to address this issue, allowing customers to use them with confidence.

Model KKP-CB500-2-T Load 500kg Self-weight 50kg Hanging method: Hook type Moving method: Equipped with a traveling crane Suction cup size: 2 suction cup chambers * Φ600mm Equipment size: Suction cup size Φ 600*H30mm Power input: AC380V, 3-phase, 50Hz Vacuum pump: [380V, 0.14kW AC, 4m3/h, oil-free vacuum pump] Suitable for lifting carbon bricks: Diameter 900*1400mm

Application range:

 Especially suitable for the handling of stone materials, carbon bricks, etc.
 Maximum load 500kg
 Various structures and suction cups available for configuration
 Non-destructive handling of workpieces
 Adjustable suction cups, can be closed individually
 Operable by one person
 Efficient, safe, fast, and labor-saving

Adaptable carbon brick size range:
600mm [Length] × 600mm [Width] × 280mm [Height]

Technical specifications:

Flat suction carbon brick vacuum lifting device
External dimensions: 450mm [Length] * 450mm [Width] * 600mm [Height]
Maximum load weight: [500kg]
Number/size of suction cups: [4] / [160/220/300 mm] diameter
Vacuum accumulator capacity: [8L]
Power failure safety pressure holding time: [5min]
Vacuum pump: [380V, 0.14kW AC, 4m3/h, oil-free vacuum pump]
Safety factor: [2.0]
Self-weight: [60 kg]
Noise: Below [65 dB]

Equipment selection:

Sound and light alarm to indicate suction and release
Vacuum pressure gauge: [VM-63-R1/4U-RG60]
Vacuum filter: [VF- 1/2]
One-way valve: [RSV-R1/4]